Basic input options

Now we will move to a more complicated (and realistic) input file. We will obtain the ground state of the nitrogen atom. We will introduce several basic input variables and will give a more detailed description of the output for this example.

The input files

This sample input file lets us obtain the ground state of the nitrogen atom, within the LDA approximation, in a closed-shell (unpolarized) configuration (as explained below, you need an auxiliary .xyz input). Note that this is not the correct ground state of the nitrogen atom! However, it will permit us to describe some of the most important input variables:


CalculationMode = gs
UnitsOutput = eV_Angstrom

Nitrogen_mass = 14.0

%Species
 'N' | species_pseudo | set | standard | lmax | 1 | lloc | 0 | mass | Nitrogen_mass
%

XYZCoordinates = 'N.xyz'

ExtraStates = 1
%Occupations
  2 | 1 | 1 | 1
  %

BoxShape = sphere
Radius = 5.0*angstrom
Spacing = 0.18*angstrom

We have introduced here several new variables:


 1
 This is a comment line
 N 0 0 0
 

Output

Once you have constructed the input file and created the N.xyz file, you may unleash Octopus on it. Lets now go over some of the sections of the output.

Species


****************************** Species *******************************
  Species 'N'
    type             : pseudopotential
    file             : '/opt/share/octopus/pseudopotentials/PSF/N.psf'
    file format      : PSF
    valence charge   : 5.0
    atomic number    :   7
    form on file     : semilocal
    orbital origin   : calculated
    lmax             : 1
    llocal           : 0
    projectors per l : 1
    total projectors : 1
    application form : kleinman-bylander
    orbitals         : 16
    bound orbitals   : 16

**********************************************************************

Here the code searches for the needed pseudopotential files, and informs the user about its success or failure. In this case, only the N.psf file is required. Once that file has been processed, some information about it is written to the output. One of the most important pieces of information to be found here is the valence charge, which tells us how many electrons from this species will be considered in the calculation.

Grid


******************************** Grid ********************************
Simulation Box:
  Type = sphere
  Radius  [A] =   5.000
  Octopus will run in 3 dimension(s).
  Octopus will treat the system as periodic in 0 dimension(s).
Main mesh:
  Spacing [A] = ( 0.180, 0.180, 0.180)    volume/point [A^3] =      0.00583
  # inner mesh =      89727
  # total mesh =     127183
  Grid Cutoff [eV] =  1160.586810    Grid Cutoff [Ry] =    85.301565
**********************************************************************

This step is about the construction of the mesh. As requested in the input file, a sphere of radius 5 Å is used, which contains a cubic regular real-space grid with spacing 0.18 Å. This implies 89727 points (inner mesh = 89727). For the sake of comparison with plane-wave-based codes, this is more or less equivalent to a plane-wave calculation that imposes a density cutoff of 1160.595 eV = 42.6 Hartree (except that in this case there is no artificial periodic repetition of the system).

Mixing


Input: [MixField = potential] (what to mix during SCF cycles)
Input: [MixingScheme = broyden]

During the self-consistent procedure one has to use a mixing scheme to help convergence. One can mix either the density or the potential, and there are several mixing schemes available.

Eigensolver


**************************** Eigensolver *****************************
Input: [Eigensolver = cg]
Input: [Preconditioner = pre_filter]
Input: [PreconditionerFilterFactor = 0.5000]
Input: [SubspaceDiagonalization = standard]
**********************************************************************

Here we see that the eigensolver used will be simple conjugate gradients (cg), and a preconditioner is used to speed up its convergence.

LCAO

After some output you should see something like:


Info: Performing initial LCAO calculation with      4 orbitals.
Info: Getting Hamiltonian matrix elements.
ETA: .......1......2.......3......4......5.......6......7.......8......9......0

Eigenvalues [eV]
 #st  Spin   Eigenvalue      Occupation
   1   --   -17.398866       2.000000
   2   --    -6.414013       1.000000
   3   --    -6.414013       1.000000
   4   --    -6.414013       1.000000

This is the first step of a ground-state calculation: obtaining a reasonably good starting density and Kohn-Sham orbitals to feed in the self-consistent (SCF) procedure. For this purpose, Octopus performs an initial calculation restricted to the basis set of atomic orbitals ( Linear Combination of Atomic Orbitals, LCAO). The resulting eigenvalues of this calculation are written to standard output.

Wavefunction kind


 Info: SCF using real wavefunctions.

Very often one can work with real wave-functions. This is particularly helpful as calculations with real wave-functions are much faster than with complex ones. However, if a magnetic field is present, if the system is periodic, or if spin-orbit coupling is present, complex wave-functions are mandatory. But don’t worry: the program is able to figure out by itself what to use.

SCF


*********************** SCF CYCLE ITER -    1 ************************
 etot  = -2.54485949E+02 abs_ev   =  4.52E-01 rel_ev   =  8.29E-03
 ediff =        2.69E-01 abs_dens =  2.82E-01 rel_dens =  5.65E-02
Matrix vector products:    108
Converged eigenvectors:      0

#  State  Eigenvalue [eV]  Occupation    Error
      1      -17.468243    2.000000   (5.8E-04)
      2       -6.518418    1.000000   (1.3E-04)
      3       -6.518418    1.000000   (1.3E-04)
      4       -6.518418    1.000000   (1.3E-04)

Density of states:

----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
---------------------------------------------------------------------%
---------------------------------------------------------------------%
%--------------------------------------------------------------------%
                                                                     ^


Elapsed time for SCF step     1:          1.11
**********************************************************************

Now the SCF cycle starts. For every step, Octopus outputs several pieces of information:

You can now take a look at the file static/info that will hold a summary of the calculation.

Restarting

Any ground-state calculation may be restarted later (to refine it if it did not converge properly, or with any other purpose), provided that the contents of the restart directory are preserved. You can try this now, just by running Octopus again. You will notice that Octopus did not give any warning after the line


 Info: Loading restart information.

This is useful if you change slightly the parameters of the simulation (for example the XC functional or the convergence criteria). If you change the grid parameters Octopus will not be able to restart from the previous calculation. If you do not want Octopus to try to restart a calculation, you can set the variable FromScratch.

In case you ware wondering what the restart information looks like, you can have a look at the contents of the restart directory. This is where the files needed to restart a calculation are stored. It may contain several sub-directories depending on the calculations previously performed. In this case, it just contains one:

 % ls restart
 gs
 % ls restart/gs
 0000000001.obf  0000000003.obf  density      df_010101.obf  df_010103.obf  dv_010102.obf  f_old_0101.obf  lxyz.obf  mixing  states  vhxc.obf          wfns
 0000000002.obf  0000000004.obf  density.obf  df_010102.obf  dv_010101.obf  dv_010103.obf  grid            mesh      occs    vhxc    vin_old_0101.obf

Octopus stores each individual state in a different binary (yet platform-independent) file. In this case, we only have four states (files 0000000001.obf to 0000000004.obf ). Some other useful quantities, like the density, are also stored in binary form. The other files are text files that contain diverse control information. It is unlikely that you will ever have to work directly with these files, but you may take a look around if you are curious.