Running Octopus on Graphical Processing Units (GPUs)
This chapter needs to be updated, as the GPU implementation has changed since it was written!!!
Recent versions of Octopus support execution on graphical processing units (GPUs). In this tutorial we explain how the GPU support works and how it can be used to speed-up calculations.
Octopus is in the process of being ported to machines with graphical processing units (GPUs). Not all operations are supported yet, but the number of supported features is growing with time.
Note that the code might fall back to CPU operation for unsupported features.
Consideration before using a GPU
Calculations that will be accelerated by GPUs
A GPU is a massively parallel processor, to work efficiently it need large amounts of data to process. This means that using GPUs to simulate small systems, like molecules of less than 20 atoms or low dimensionality systems, will probably will be slower than using the CPU.
Not all the calculations you can do with Octopus will be effectively accelerated by GPUs. Essentially ground state calculations with the rmmdiis eigensolver (and calculations based on ground state calculations, like geometry optimization) and time propagation with the etrs and aetrs propagators are the simulations that will use the GPU more effectively. For other types of calculations you might see some improvements in perfomance. Moreover, some Octopus features do not support GPUs at all. Currently these are:
HGH or relativistic pseudopotentials.
Periodic systems are partially supported, but there are limitations which might force the code to run on the CPU.
In these cases Octopus will be silently executed on the CPU.
Octopus GPU support is based on the OpenCL framework, so it is vendor independent, currently it has been tested on GPUs from Nvidia and AMD (ex-ATI). Recently, CUDA support is added using a CUDA wrapping layer.
Actually, the non-CUDA version is currently untested, as our development systems are all NVidia CUDA based.
In order to run Octopus, the GPU must have double precision support. For AMD/ATI cards this is only available in high-end models: Radeon 58xx, 69xx, 78xx, 79xx, and Firepro/Firestream cards. All recent Nvidia cards support double precision (4xx and newer), low- and middle-end cards however have very limited processing power and are probably slower running Octopus than a CPU.
The other important factor is GPU memory, you need a GPU with at least 1.5 GiB of RAM to run Octopus, but 3 GiB or more are recommended.
Activating GPU support
Octopus has GPU support since version 4.0; to activate it you need a version compiled with OpenCL support enabled (see the manual for details). If your version of Octopus was compiled with OpenCL support you should see that ‘opencl’ among the configuration options:
Running octopus Version : superciliosus Revision : Build time : Thu Feb 14 22:19:10 EST 2013 Configuration options : max-dim=3 openmp '''opencl''' sse2 avx Optional libraries : netcdf '''clamdfft clamdblas'''
Ideally your Octopus version should also be compiled with the optional libraries ‘clamdfft’ and ‘clamdblas’, that are part of the [https://developer.amd.com/tools/heterogeneous-computing/amd-accelerated-parallel-processing-math-libraries/ AMD APPML] package (these libraries work on hardware from other vendors too, including Nvidia).
Starting the tutorial: running without OpenCL
If you have a version of Octopus compiled with OpenCL support, by setting the DisableAccel to
yes you can tell Octopus not to use OpenCL.
Selecting the OpenCL device
OpenCL is designed to work with multiple devices from different vendors. Most likely you will have a single OpenCL device, but in some cases you need to select the OpenCL device that Octopus should use.
In OpenCL a ‘platform’ identifies an OpenCL implementation, you can have multiple platforms installed in a system. Octopus will list the available platforms at the beginning of the execution, for example:
Info: Available CL platforms: 2 * Platform 0 : NVIDIA CUDA (OpenCL 1.1 CUDA 4.2.1) Platform 1 : AMD Accelerated Parallel Processing (OpenCL 1.2 AMD-APP (1084.4))
By default Octopus will use the first platform. You can select a different platform with the AccelPlatform variable. You can select the variable by name, for example:
AccelPlatform = amd
or you can use numeric values that select the platform by its index in the list:
AccelPlatform = 1
The first form should be preferred as it is independent of the order of the platforms.
Each OpenCL platform can contain several devices, the available devices on the selected platform are printed by Octopus, like this:
Info: Available CL devices: 2 Device 0 : Tahiti Device 1 : Intel(R) Core(TM) i7-3820 CPU @ 3.60GHz
Each OpenCL device has a certain type that can be ‘cpu’, ‘gpu’, or ‘accelerator’. By default Octopus tries to use the first device of type ‘gpu’, if this fails Octopus tries to use the default device for the system, as defined by OpenCL implementation. To select a different device you can use the AccelDevice variable, you can select the device by its index or by its type (‘cpu’, ‘gpu’, or ‘accelerator’).
the Octopus OpenCL implementation is currently designed to execute efficiently on GPUs. Octopus will run on CPUs using OpenCL, but it will be slower than using the CPU directly.
After Octopus has selected an OpenCL device it will print some information about it, for example:
Selected CL device: Device vendor : Advanced Micro Devices, Inc. Device name : Tahiti Driver version : 1084.4 (VM) Compute units : 32 Clock frequency : 925 GHz Device memory : 2048 MiB Max alloc size : 512 MiB Device cache : 16 KiB Local memory : 32 KiB Constant memory : 64 KiB Max. workgroup size : 256 Extension cl_khr_fp64 : yes Extension cl_amd_fp64 : yes
To obtain good peformance on the GPU (and CPUs), Octopus uses blocks of states as the basic data object. The size of these blocks is controlled by the StatesBlockSize variable. For GPUs the value must be a power of 2 (the default is 32) and for optimal performance must be as large as possible, the catch is that for large values you might run out of GPU memory.
The Poisson solver
If you want to used a GPU-accelerated Poisson solver, you need to use the ‘fft’ solver and to have the ‘clamdfft’ library support compiled. To select the solver, just add
PoissonSolver = fft FFTLibrary = clfft
to your input file.